Ugrás a tartalomra

Happymodel Mobula7 1S HD - 75mm Micro Whoop FPV Racing Drone with ELRS BNF, 0802 20000KV Motor & RunCam Split3-Lite 1080P Camera DVR - Perfect for Drone Racing Enthusiasts

Eladva
Jelenlegi ár 104.900 Ft
Eredeti ár 137.800 Ft
Eredeti ár 137.800 Ft - Eredeti ár 150.000 Ft
Eredeti ár 137.800 Ft
104.900 Ft - 104.900 Ft
Jelenlegi ár 104.900 Ft
  Ingyenes 3-8 Nap Nyomon követett kézbesítés     Könnyű 30 napos visszatérítés  
Elérhetőség:
Nincs raktáron
Elérhetőség:
Nincs raktáron
Receiver: 2.4GHz ELRS SPI

Kiszállítás és kézbesítés

Általában 24 órán belül kiszállításra kerül.
Ingyenes 3-8 munkanap EU-s nyomon követett kézbesítés.

Visszatér

Ez a termék megfelel a 30 napos visszaküldési szabályzatunknak.

PayPal Icon
Mastercard Icon
Visa Icon
Apple Pay Icon
Shop Pay Icon
Google Pay Icon
Amex Icon
Klarna Icon

Termékleírás:

Introducing the Mobula7 1S HD 75mm Whoop Drone

The Mobula7 1S HD version is a lightweight and efficient 75mm brushless whoop that provides 1080P high-definition video recording capabilities. Featuring a highly integrated All-In-One (AIO) flight controller supporting ESC with a maximum current output of 12A, this drone is a top choice for capturing stunning aerial footage. With added blackbox support for gyroflow stabilization, enjoy safe and smooth flights while recording high-quality videos.

Notable Features

  • X12 5-IN-1 AIO flight controller
  • VTX Power up to 400mw ELRS V2.0 Support
  • NEW RS0802 KV20000 motors
  • 1080P HD Video record
  • Blackbox Ready support GYROFLOW
  • Smooth and powerful performance
  • Compatible for 1S Lipo/LIHV
  • Recommended 1S 450mah/550mah/650mah batteries (Not included)

Specifications

  • Brand Name: Happymodel
  • Item Name: Mobula7 1S HD 75mm Micro FPV whoop drone
  • Wheelbase: 75mm
  • Size: 99mm*99mm*45.5mm
  • Weight: 33g
  • Receiver option: SPI 2.4GHz ELRS V2.0 / SPI Frsky D8/D16

Motor Specifications

  • Mode: RS0802 KV20000
  • Configuration: 9N12P
  • Stator Diameter: 8mm
  • Stator Length: 2mm
  • Shaft Diameter: Φ1.5mm
  • Motor Dimension(Dia.*Len): Φ10.5mm*13.5mm
  • Weight: 2.0g
  • No. of Cells (Lipo): 1S only

Propeller Specifications

  • Weight: 0.24g
  • Material: PC
  • Pitch: 1 inch
  • Props Diameter: 40mm
  • Center Thickness: 5mm
  • Center Hole Diameter: 1.5mm
[The rest of the specifications]

Package Contents

  • 1x Mobula7 1S 75mm whoop Drone Frame (Mobula7 v4 frame)
  • 1x Flight Controller AIO ESC Receiver vtx
  • 4x RS0802 KV20000 brushless motor
  • 2x Gemfan 1610-2 bi-blade propellers CW
  • 2x Gemfan 1610-2 bi-blade propellers CCW
  • 1x Runcam Split3-Lite Camera
  • 1x External Blackbox Module supporting gyroflow
  • 1x Propeller disassembly tool
  • 1x 1S series balance charging board

Product Specifications

Motor Mode: RS0802 KV20000
Configu-ration:9N12P
Stator Diamter:8mm
Stator Length:2mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ10.5mm*13.5mm
Weight(g):2.0g
No.of Cells(Lipo):1S only
Propeller Weight:0.24g
Material:PC
Pitch:1 inch
Props Dia:40mm
Center Thickness:5mm
Center Hole Dia:1.5mm
Flight Controller X12 ELRS V2.0 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280
X12 Frsky V1.0 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: ICM20689(SPI connection)
Mount hole size: 25.5mm*25.5mm
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 12A(each) Blheli_S 4in1 ESC
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G OpenVTX 0mw~400mw
Built-in ExpressLRS 2.4G,Frsky D8/D16
Built-in voltage detection
Built-in current sensor
Onboard 4in1 ESC
Power supply: 1S LiPo/LiPo HV
Current: 12A continuous peak 15A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: Z_H_30_REV16_7.HEX
Default protocol: DSHOT300
Support Bluejay firmware
When use Blujay firmware with 48khz, should set startup power to 1100/1200
Onboard SPI ExpressLRS 2.4GHz Receiver

Packet Rate option: 50Hz/150Hz/250Hz/500Hz
ExpressLRS Firmware version: V2.0
RF Frequency: 2.4GHz
Antenna : Enameled copper wire length 30mm
Telemetry output Power: <12dBm
Receiver protocol: SPI ExpressLRS

Compatible with ExpressLRS V2.0 TX Module
Couldn’t flash separately ExpressLRS firmware

Onboard Frsky SPI D8/D16 receiver Version

Packet Rate option: 50Hz/150Hz/250Hz/500Hz
ExpressLRS Firmware version: V2.0
RF Frequency: 2.4GHz
Antenna : Enameled copper wire length 30mm
Telemetry output Power: <12dBm
Receiver protocol: SPI ExpressLRS

Compatible with ExpressLRS V2.0 TX Module
Couldn’t flash separately ExpressLRS firmware

Onboard 5.8g OPENVTX
Firmware version: OPENVTX
Smartaudio v2.1
PIT Mode support
RCE Mode support
Channels:48ch
Transmitting Power: 0/RCE/25mw/100mw/400mw
Power supply: DC 5V
Current (5v): <650ma (400mw)
Runcam Split3-Lite

Model: RunCam Split3-Lite
Field of View(FOV):Recording FOV 165°(FPV FOV: 165 ° @16:9, 130 ° @4:3)
Video Resolution:1080@60fps/1080@50fps/1080@30fps/720@60fps
Video File Format: MOV
Image Resolution:2 MP
TV Mode: NTSC (720*480)/PAL (720*576) Switchable
Interface: JST 1.25mm / UART and SH 1.0mm
Max Micro SD Card Supported 64G(need Class 6 or above, recommend Class 10/UHS-I/UHS-II/UHS-III)
Hole Distance of Installation: 25.5*25.5mm
PCB Size: 29*29mm
Lens Module Size: 14*14mm
Lens Specs: M9
Power Input: DC 5-20V(Non-direct power supply from battery. Powered directly with battery will generate surges and burn the camera.)
Working Current: 450mA @5V

External Blackbox

Size:18*15.5*4.5

With Built-in Voltage booster module

Weight:1.5gram

SD Card support max to 32GB

SD Card need to use FAT32 Format

Notes: Need to careful to insert the TF SD Card , and don't pull it out while install the battery.

Product Images


Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question
Vásároljon több ezer terméket

Raktáron és kiszállításra készen.

Könnyű 30 napos visszatérítés

Könnyen kezelheti a visszaküldéseket fiókján keresztül.

Ingyenes nyomon követett szállítás

Költsön el legalább 20 eurót a minősítéshez.

A+ ügyfélszolgálat

Elkötelezettek vagyunk a nagyszerű szolgáltatás mellett.